Your Cart is Empty
Nubuk Fresh is a gentle water-based tint suitable for refreshing and re-tinting suede and buffalo leather that is not too faded.
1 liter is sufficient for one leather set. In rare cases the need may be higher. 250 ml is sufficient for smaller objects or for blending.
Nubuk Fresh 250 ml is only available in the basic colors for self-mixing. From one liter also special colors and colors F001 - F046 are mixed.
Always test all products first on a concealed area for changes!
Always thoroughly clean and degrease the smooth or nubuck leather to be treated before dyeing! If possible, dry-clean the leather first, especially if it is very greasy. Otherwise clean with the leather cleaning petrol and/or the grease remover spray and/or with the leather sanding pad. Leather that is too heavily spotted or leather that has been soaked with sweat is not suitable for color refreshing. The tint would not be accepted evenly and would not adhere sufficiently to the leather fiber.
Spray Nubuk Fresh thinly from seam to seam and allow to dry. After drying, carefully brush or rub the surface with a terry cloth towel. Repeat process as needed. Be careful of drips. They will cause stains. Redyeing or lightening of rough leathers is not possible. For very dark leathers used in cars and furniture, Nubuk Fresh can also be applied with a sponge.
Rough leathers - when they are new - always give off color slightly. Even after treatment with Nubuk Fresh, a white cloth will produce a slight abrasion. However, this is harmless. If a fixation is still desired, Nubuk Fresh Neutral can be applied after the color refreshment. In addition to the impregnation, this also fixes the color. In extreme cases, add 1% Crosslinker IC2.
Always treat nubuck leather with Aniline & Rough Leather Protector and Leather Impregnation. This maintains the leather, keeps it supple, and reimpregnates the leather.
