Description
Ideal for repairing scratches, abrasions or slight fading on leather sofas or leather car seats.
1 x COLOURLOCK Leather Fresh (Leather dye), 150 ml
1 x COLOURLOCK Mild or Strong Leather Cleaner, 125 ml
1 x COLOURLOCK Leather Protector, 150 ml
1 x Cleaning Sponge
1 x Sponge for Leather Fresh application
1 x Cleaning Cloth
This set is sufficient for treating a complete car interior or set of furniture. Use the Cleaner and Protector on all areas and the colour dye only on specific areas that need repairing. In the event of extreme colour fading or soiling, a larger amount of Cleaner or colour dye might be necessary. Additional single COLOURLOCK Leather Fresh 150 ml can be purchased as required.
Application areas:Car Leather, Furniture Leather
For: Pigmented leather, Semi-aniline leather
Full details and instructions
This repair kit is ideal for repairing scratches, abrasions or slight fading on leather furniture or leather car seats.
First, clean the leather thoroughly before refreshing the colour or the application of care products. Use COLOURLOCK Mild Leather Cleaner for normal degrees of soiling but, for more serious soiling, you will need COLOURLOCK Strong Leather Cleaner. Cleaning prior to treatment prevents dirt sticking on the leather's surface during colour or care. Our COLOURLOCK Leather Cleaning Brush will remove soiling from the depths of the grain (for best results, use a circular motion in all directions). You can also use the cleaning sponge contained in this kit. After cleaning or, in the case of recently treated or oily leather, you should de-grease it in advance using COLOURLOCK Leather Cleaning Spirit (not contained in the kit).
Once the surface has been prepared, apply COLOURLOCK Leather Fresh to revitalise the leather's original colour on scratches, abrasions or slight fading (which are often found in vehicle seat side bolsters and furniture sitting areas). The colour can be prepared according to our colour chart or send us a leather sample by post and we will mix it for you (additional charge of $16.10 will apply for mixing colour according to sample).
For surface care, we recommend our COLOURLOCK Leather Protector. It contains antioxidants, that stop the leather's decay, and UV filters to protect the surfaces from colour fading. It will also make the leather soft and supple once again.
Application
Always test any products first in a hidden area for changes or to confirm colour matching!
COLOURLOCK Mild Leather Cleaner
The Leather Cleaner is provided in a foam dispenser bottle. Foams clean the leather more efficiently than liquid agents, the consumption is considerably smaller, and the leather does not become wet, which could otherwise lead to hardening after drying.
The Leather Cleaner gently cleans all kinds of nappa leather. Apply some foam on the Cleaning Sponge and proceed with cleaning the leather. Remove dirty foam with a slightly moist cloth.
COLOURLOCK Leather Fresh (Leather dye)
After a pre-cleaning with the COLOURLOCK Strong Leather Cleaner (which has a slight re-greasing property) or in case of oily spots, de-grease the leather additionally with COLOURLOCK Leather Cleaning Spirit.
Apply the colour after the cleaner has dried, usually 1 to 3 hours after cleaning.
Use a sponge to apply the colour evenly on the respective surfaces, working from seam to seam. Dry afterwards with a hair dryer. On small spots, simple application is sufficient. Only treat surfaces with colour changes! If high opacity is desired, apply the colour in several layers and dry in-between layers with a hair dryer.
COLOURLOCK Leather Protector
Use COLOURLOCK Leather Protector as soon as the leather has dried after cleaning or colour refreshment, ideally on the following day. Apply with a soft cloth and let dry without polishing afterwards. One application is sufficient. Strained surfaces (heavy use or in sunlit areas) should be treated every three months. Clean before in case of soiling!
Ingredients
Mild Leather Cleaner Ingredients according to "INCI" (International Nomenclature Cosmetic Ingredients):
AQUA, SODIUM LAURETH SULFATE
Ingredients of the odorants and preserving agents according to "INCI"
METHYLISOTHIAZOLINONE, IODOPROPYNYL BUTYLCARBAMATE
(The INCI information assists persons who are allergic to certain compounds, which are harmless to most other persons, in identifying these.)
Ingredients explained in a more understandable way:
The Mild Leather Cleaner is a gentle cleaner adjusted to the pH value of leather.
Strong Leather Cleaner Ingredients according to "INCI" (International Nomenclature Cosmetic Ingredients):
AQUA, POTASSIUM TALLOWATE, POTASSIUM COCOATE, ALCOHOL, SUCROSE, GLYCERIN
Ingredients of the odorants and preserving agents according to "INCI"
CITRIC ACID
(The INCI information assists persons who are allergic to certain compounds, which are harmless to most other persons, in identifying these.)
Ingredients explained in a more understandable way:
The Strong Leather Cleaner is a soap-based cleaner for strongly soiled nappa leather according to a traditional recipe.
Leather Fresh Ingredients explained in a more understandable way:
Non-staining, colour-fast pigments and abrasion-resistant binder, which also come into use in the tanning industry for dyeing nappa leather.
Leather Protector Ingredients according to "INCI" (International Nomenclature Cosmetic Ingredients):
AQUA, WHITE OIL, OCTOCRYLENE, POLYMERIC EMULSIFIER, CERA CARNAUBA, TOCOPHERYLACETATE, PEG-3 SORBITANOLEATE, PEG, SODIUM HYDROXIDE
Ingredients of the odorants and preserving agents according to "INCI"
2-BROMO-2-NITROPROPANE-1,3-DIOL
(The INCI information assists persons who are allergic to certain compounds, which are harmless to most other persons, in identifying these.)
Ingredients explained in a more understandable way:
Moisturizer (keeps the leather supple), UV filter (protection against bleaching), antioxidants (prevent decay), friction reducer (protection against abrasion)
